serach
SEARCH
ENTER
CANNEL
新闻中心
/
/
/
How to install sense stair lamp products

NEWS CENTER

How to install sense stair lamp products

  • Categories:stair lamp news
  • Author:
  • Origin:
  • Time of issue:2022-02-11
  • Views:0

(Summary description)First, measure the length, width, and channel lights of the steps. First, take it from the projection layer from the corner of the wall, and extend the main line of sense stair lamp products along the steps to the bottom step.

How to install sense stair lamp products

(Summary description)First, measure the length, width, and channel lights of the steps. First, take it from the projection layer from the corner of the wall, and extend the main line of sense stair lamp products along the steps to the bottom step.

  • Categories:stair lamp news
  • Author:
  • Origin:
  • Time of issue:2022-02-11
  • Views:0
Information

1. First, measure the length, width, and channel lights of the steps. First, take it from the projection layer from the corner of the wall, and extend the main line of sense stair lamp products along the steps to the bottom step.

sense stair lamp products

2. Place the cut sense stair lamp products on the steps, and then make holes on the step strips according to the steps. The number of openings is determined according to the actual situation. The more the number, the firmer. The steps of about 1 meter are installed with about 3 screws, and the steps larger than 1.2 meters are generally installed with 4 screws.

3. Put the expansion bolt into the screw hole, and then use the self-tapping screw to fix the sense stair lamp products well.

4. Connect the lines of the sense stair lamp products, and then put the light strip into the light strip groove of the step strip. At this time, pay attention to the light strip wire head to follow the wire groove of the blocking head, and cannot be pressed by the blocking head position, otherwise it is easy to A disconnection occurs. After installing the light strip on the steps of the aluminum profiles, place the aluminum profiles into the steps.

5. Put the sense stair lamp products in the blocking head, and connect the power cord to the main line. If there is an LED light plate on the other side of the step, you only need to use one main line and install it on one side of the light plate; if there are LED light plates on both sides of the step, it is recommended to use the main line on the left and right sides or connect the power lines on both sides. The led light plate on the left (right) side is connected to the main line on the other side through the light strip.

6. Connect the wires of the left and right blocking heads and put them on both sides of the step strip. Put the main line into the wire groove of the resistance head, then put an expansion bolt at the position of the screw hole of the resistance head, and then use the self-tapping screw to fix the main line.

7. The high and low voltage bars are installed on both sides of the horizontal and vertical directions. The main line should be hidden between the high and low voltage bars, and special attention should be paid to the gap between the high and low voltage bars.

8. Install the entire stair step block head and step strip according to the above installation method of sense stair lamp products, and then uniformly install the block head cover with a number plate or no number together.

Keyword:

Scan the QR code to read on your phone

Related information

There is currently no information to display
Please add data record on website background.
Inquire NOW
X
img
YiSheng Lighting

CONTACT US

TEL:+86-760-87550190
MOBILE :+86-13318259200/13302595030
E-MAIL:sales@yishenglighting.com
ADD :NO.23 Lefeng6th Road, Henglan, Zhongshan, China

YiSheng Lighting